Optimize your fleet's performance with the right hydraulic oil. Understand the differences between ISO 32 and ISO 46 to ensure efficiency, reduce wear, and maintain DOT compliance.
Choose the right hydraulic oil for peak performance and longevity.
Hydraulic oils ISO 32 and ISO 46 are defined by their viscosity grades, critical for heavy fleet performance in synthetic vs mineral gear oil applications under varying conditions.
ISO 32 has a lower viscosity, making it ideal for colder climates or systems requiring faster flow, while ISO 46, with higher viscosity, suits warmer environments or heavier loads. Selecting the right grade impacts efficiency, wear protection, and ISO cleanliness targets.
| Property | ISO 32 | ISO 46 |
|---|---|---|
| Viscosity at 40°C | 32 cSt | 46 cSt |
| Best Operating Temp | 0-80°F | 50-120°F |
| Load Capacity | Moderate | High |
| Flow Rate | Faster | Slower |
| Typical Use | Light-duty systems | Heavy-duty systems |
Understand the critical factors to consider when selecting hydraulic oil for your fleet to optimize performance and reduce maintenance costs.
A step-by-step guide to choosing and implementing the right hydraulic oil for your fleet.
Evaluate temperature, load, and system requirements to determine the appropriate viscosity grade.
Choose between ISO 32 or ISO 46 based on diesel fuel testing and OEM recommendations.
Set up oil sampling intervals to monitor performance and contamination.
Answers to key questions about selecting and using hydraulic oils for heavy fleets.
ISO 32 has a lower viscosity (32 cSt at 40°C) for colder climates and lighter loads, while ISO 46 (46 cSt at 40°C) is thicker, suited for warmer temperatures and heavier loads.
Mixing is not recommended as it can alter viscosity and performance. Always drain and replace with the correct oil, following fluid labeling policy.
Test hydraulic oil every 1,000-2,000 hours or as per oil sampling intervals to ensure optimal performance and cleanliness.
ISO 46 offers better wear protection for high-pressure systems due to its thicker film, but ISO 32 may be sufficient for lighter loads, reducing energy loss.
Explore additional resources to optimize your gear oil management strategy.
Set and maintain ISO cleanliness targets for optimal oil performance.
Learn MoreDiscover comprehensive guides for all fluid management aspects in your fleet
Ensure peak performance and compliance with expert guidance on hydraulic oil selection. Start today with our tools and resources.
Choose the right oil for your fleet
Get tailored advice for your needs
Maximize efficiency and reduce costs