AtoB GO Data Inside Every Inspection & Work Order
Connect your AtoB GO devices to HVI — and engine hours, odometer readings, GPS location, and diagnostic fault codes from MyAtoB flow directly into your fleet inspections, work orders, and preventive maintenance schedules. Your AtoB hardware stays in place. Setup in minutes.
What Your AtoB GO Devices Send to HVI
AtoB GO devices capture the broadest data stream in the telematics industry — covering 9,000+ vehicle makes and models. HVI receives this data and puts it to work inside inspections, work orders, and PM schedules.
Engine Hours
Real-time engine hour readings from the AtoB GO device. PM schedules trigger at exact thresholds — 250hr, 500hr, 2000hr — without manual entry.
Odometer & Mileage
Live odometer readings sync from AtoB. Mileage-based PM schedules fire at 5K, 25K, 100K mile intervals from actual vehicle data.
Gallons & Fuel Type
Gallons purchased and fuel type captured per transaction. Per-vehicle consumption trends build automatically for fleet fuel analysis.
Diagnostic Fault Codes
DTCs from the vehicle ECM captured by AtoB GO and sent to HVI. Fault severity, description, and history visible in inspection records.
Driver & Vehicle Behavior
Speed, idle time, harsh braking, and acceleration data from AtoB. Driver behavior insights combined with maintenance records.
Date & Time
Battery voltage monitoring from AtoB GO devices. Low battery alerts feed into HVI maintenance planning before a roadside failure.
How AtoB Integration Works With HVI
Your AtoB GO devices collect data in the field. HVI pulls that data via the AtoB API and puts it to work inside inspections, work orders, and PM schedules.
Connect AtoB
Select AtoB from HVI's integration library. Enter your MyAtoB credentials. The connector authenticates and maps your fleet data automatically.
AtoB Data Flows
Engine hours, odometer, GPS location, fault codes, and vehicle health data sync from your AtoB GO devices into HVI continuously.
HVI Acts on the Data
Per-vehicle fuel reports build automatically. Consumption trends, spend tracking, and cost anomalies are flagged for investigation.
Live GPS
LocationSpeed
TrackedTrips
HistoryLive Vehicle Location From Every AtoB GO Device
Your AtoB GO devices track every vehicle in real time. HVI pulls that location data, route history, speed, idle time, and trip analytics into the fleet management layer — so inspections and work orders always reference the latest vehicle position and usage data.
Engine Hrs
Real-TimeOdometer
MileagePM Trigger
AutoPM Schedules From Real AtoB Engine Data
Stop guessing when service is due. HVI pulls real-time engine hours and odometer readings from your AtoB GO devices and triggers PM schedules based on actual vehicle data. When a vehicle hits a service threshold, HVI creates the notification automatically.
DTCs
CapturedHealth
MonitoredWork Order
CreatedAtoB Fault Codes & Remote Diagnostics in HVI
AtoB GO devices read diagnostic trouble codes from the vehicle ECM and transmit them to MyAtoB. HVI receives these fault codes with severity levels, descriptions, and fault history — so your maintenance team sees the full diagnostic picture before starting any repair.
AtoB + HVI
Fleet Maintenance HubAuto
ImportPer-Vehicle
Reports0
Manual EntryWhy HVI for AtoB
Digital Fleet Inspections
Pre-trip, DVIR, daily operator inspections on iOS, Android, and Web. Guided checklists with photo evidence, voice notes, and signed PDF reports — enhanced with live AtoB data.
One-Click Work Orders
Inspection defect becomes a work order in one tap. AtoB fault codes are included automatically. Assign technicians, track labour, parts, and completion.
AtoB-Driven PM Scheduling
PM schedules triggered by real engine hours and mileage from your AtoB GO devices. No manual updates, no missed intervals, no spreadsheet guessing.
Parts, Fuel & Cost Tracking
Parts inventory with min/max levels, fuel logs, and cost-per-vehicle analytics. AtoB usage data combined with maintenance costs for total fleet visibility.
Fleet Analytics & Compliance
Dashboards for fleet health, maintenance costs, and compliance audit trails. AtoB telematics data combined with HVI maintenance records.
AtoB Integration FAQ
Common questions from fleet managers before connecting AtoB to HVI.
Engine hours, odometer/mileage, GPS location, speed, trip history, idle time, diagnostic fault codes (DTCs), battery voltage, and driver behavior data. All captured by your AtoB GO devices and synced to HVI.
No. Your existing AtoB GO hardware stays in place. HVI connects via the AtoB API at the software level. No hardware changes, no vehicle downtime, no rewiring.
HVI pulls real engine hours and mileage from your AtoB GO devices. PM schedules trigger from actual vehicle data, not manual estimates. When a vehicle hits a service threshold, HVI creates the notification automatically.
AtoB GO devices work with over 9,000 vehicle makes, models, and years. Diesel, gas, EV, and PHEV vehicles of all sizes are supported. Your fleet composition doesn't limit the integration.
15–30 minutes via the guided setup wizard. Enter your MyAtoB credentials, and the connector handles authentication and fleet data mapping automatically.
Yes. Engine hours, mileage, GPS location, and fault code data sync continuously from your AtoB GO devices to HVI as the data updates.
Yes. HVI supports AtoB alongside FleetCor, WEX, Comdata, EFS, RoadFlex, Coast, Intevacon, and Car IQ. Multiple fuel card providers in one dashboard.
No. AtoB integration is included in the HVI subscription with no per-integration fees and no implementation charges. The free trial includes full AtoB integration access.
Connect AtoB. Automate Your Fleet Maintenance.
Engine hours, mileage, GPS, and fault codes from your AtoB GO devices flowing into inspections, work orders, and PM schedules. 9,000+ vehicle models supported. Setup in minutes. Free trial included.